Products Categories
Your Cart
Your shopping cart is empty!
TSC-8900
The TSC-8900 is a SilcoNert® passivated Total Sulfur Content analyzer
| Analysis Time: | ~300 seconds |
| Detector: | PID (High-sensitivity PID Optional) |
| Column: | Capillary |
| Oven Temperature: | 50°C Nominal |
| Carrier Gas: | Hydrogen 6 cc/min, 30 cc/min for reactor, nominal |
| Lower Detection Limit: | < 20 ppb as Hydrogen Sulfide (High-sensitivity PID < 1 ppb as Hydrogen Sulfide optional) |
| Accuracy: | 1% of full-scale |
| Precision: | 2% of measured value |
| Span Drift (24 hrs.): | < 2% of full-scale |
| Sample Flow Rate: | 100 - 300 cc/min, typical |
| Analog Outputs: | (1) 0 - 20 mA or 4 - 20 mA loop power supplied, isolated. Selectable for: gas concentration, unintegrated detector signal. Options for up to 20 additional programmable 0 - 20 mA, 4 - 20 mA or voltage outputs: 0 - 1V, 0 - 5V, or 0 - 10V |
| Digital Outputs: | RS-232, optional Local Area Network |
| Relays: | (5) User programmale relays for concentration and diagnostic alarms (1A @ 30Vdc). Options for up to 32 additional relays available. |
| Inputs: | Optional digital input board for 3 contact closure inputs. Supports start analysis, start calibration, and analyze calibration gas sample. |
Hydrogen Carrier gas (Ultra Pure) Fuel Gases:
-
- 30 psig delivery
- Actuator Air
- 60 psig
Basic CO2 software method is pre-programmed by Airborne Labs International as default. Certified laboratory back-up testing also available for result confirmation.
Optional Accessories:
- Hydrogen Generator
- Zero Air Generator
- Digitial Flow Meter
- Hydrogen Leak Detector
- Certified Gas Standards
- Pressure Regulators and transfer lines
